An overheating furnace may be a severe problem. It will often turn off on its own, leaving your home freezing. Furthermore, before it reaches this stage, it will very definitely be badly damaged, demanding repairs. Here are several indicators that your furnace is about to overheat, as well as the Furnace Cleaning Humble TX guide you on how to reset it and what to do if it doesn’t work.
Symptoms of an Overheating Furnace
You may notice the following indications if your furnace is overheating or about to overheat:
- Unless you’ve just turned on your furnace for the first time in the fall, that burning smell isn’t dust being burnt off the stove. Instead, it’s an indication that the furnace is overheating, maybe due to a blocked filter.
- A failure with the blower motor is the most common source of a buzzing sound. If it can’t work, it won’t distribute heat, producing problems for the furnace adequately. Other noises might indicate the stove is likely to overheat.
- Your furnace may have overheated if it turns off and then doesn’t turn back on when the temperature in your home falls below your preferences.
Can You Tell Me How To Reset Your Furnace?
If you suspect your furnace has overheated, resetting it is a good first step. This is how it’s done:
- Reduce the thermostat’s temperature to the lowest level.
- At the circuit breaker, turn off the furnace’s power.
- Turn off the main gas supply at the valve, but leave the pilot gas supply on if you’re using a gas furnace.
- If the pilot light has gone out, fire a match to relight it.
- Re-establish the gas supply.
- It is necessary to push the reset button, which is generally red. It’s conceivable you’ll need to hold it for up to 30 seconds.
- Reconnect the power supply to the furnace.
- Set your thermostat to the temperature you desire.
Is it conceivable that your heater has become too hot to handle? Please don’t wait any longer to have it fixed. Don’t hesitate to contact us right away to ensure that your family is kept warm this winter by a functioning furnace.
This might assist you in resolving your furnace problem. However, it may just overheat again. In this case, an underlying issue is most likely causing it to overheat. There are usually issues with airflows, such as a broken fan or filter. As a consequence, the heat generated by the furnace is unable to escape, leading to overheating. However, there might be more culprits. To figure out what’s going on, you’ll need the help of our professional from Furnace Installation Humble, TX.
Your furnace keeps shutting off, and the stink of burning remains. It’s currently below freezing outside, and you’re not getting any warmer inside. Unfortunately, these are signs that your furnace is overheated and not functioning correctly. Overheating furnaces should never be overlooked! The problem will not go away on its own, and continuing to operate your furnace might cause catastrophic and expensive damage. As a consequence, carbon monoxide poisoning is a risk. Visit JHC Cooling and Heating, our official website, or call us at (281) 658-4946.